Call Toll-Free: (800) 220-2466 or (252) 571-0092

Drive In Containment Pan

This 20 ft. by 9′ 8″ wide I.D. steel containment pan can be transported via a flat bed truck to nearly any location. When installed on compacted soil or gravel, large tanker trucks or even lug wheeled or tracked off-road equipment can be driven into this containment for refueling, temporary parking or for vehicle decontamination before it leaves a field remediation site. Unique, drop-down tailgates at either end or both ends allows for vehicles, even forklift trucks to enter or leave.

The standard 20 ft. long design has 10″ high containment walls and will hold approximately 1,000 gallons of liquid. The pan sidewalls are equipped with four, 3″ NPT plugged, hub couplings so collected liquid can be hose drained to other “full volume” vessels or an U/G tank. These units can be positioned end-to-end to accommodate longer tankers or equipment so long as the adjacent tailgates can be closed after driving into it.

These 2,400 lbs. steel containment are designed for rough terrain use, not just on well-swept, smooth concrete like the common polyethylene drive-in “babypools” They are available in Corten steel and stainless or fiberglass coated steel.

The drive-in relocatable containment can be safely used for storage of stacked drums, small tote tanks and even for trailer mounted tanks. Higher sidewall height can be designed. Narrower units can be used as truckbed liner containment.